Advanced Computing Applications in Civil Engineering

<div><!--block--><strong>Contents:<br>1.</strong> Numerical Modeling of Hybrid FRP Strengthened Short Concrete Columns under Eccentric Compression <strong>2.</strong> Interval Finite Element Analysis of Thin Plates <strong>3.</strong> Moving Beyond Finite Elements: Towards Meshless Isogeometric Analysis <strong>4.</strong> Imaging Preferential Pathways in Fractured Granites using ERT-Tracer Experiments and Numerical Simulations <strong>5.</strong> Analysis of Dome for Different Pulse Loading History of Blast Load <strong>6.</strong> A Seismic Design of Building-Equipment System using Conical Friction Pendulum Isolator <strong>7.</strong> Study on Plain Surface with Wave Type Configuration Bar Reinforced Concrete Frame Subjected to Lateral Loads <strong>8.</strong> Seismic Response of Elevated Liquid Storage Steel Tanks Isolated by Polynomial Friction Pendulum Isolator <strong>9.</strong> Effect of Blast Loading on Pipe Rack for Varying Peak Overpressure <strong>10.</strong> Seismic Response of Segmental Building Using Resilient Friction Base Isolator <strong>11.</strong> Double Polynomial Friction Pendulum System for Seismic Isolation of Three Span Continuous Deck Bridge <strong>12.</strong> Structural Behavior of Four Legged Transmission Line Tower Under Tornado Loading <strong>13.</strong> Seismic Response of Liquid Storage Tank Isolated with Double Polynomial Friction Pendulum Isolator <strong>14. </strong>Effect of Multi-Support Excitation on Cable Stayed Suspension Hybrid Bridge <strong>15.</strong> Performance of Channel and Tee Types of Shear Connector in Composite Slab with Steel Decking at Elevated Temperature <strong>16.</strong> A Three Dimensional Non-Linear Finite Element Modelling of Top-Seat Angle Connection <strong>17.</strong> Analysis of Composite Laminated Plate using FEM <strong>18. </strong>Evaluation of Response Reduction Factor of Aircraft Hangar Constructed by Double Layer Grid System <strong>19.</strong> An Energy Based Seismic Evaluation and Retrofit Strategy of Existing Reinforced Concrete (RC) Building by Energy Spectrum Method <strong>20.</strong> Analytical Study on Two-Way Rectangular RC Slab with Opening at Different Locations <strong>21.</strong> A Study on Retrofitting of RCC Industrial Building <strong>22.</strong> Influence of Modeling Aspects on the Seismic Performance of A Tall Building – Numerical Study on A Twenty Storeyed RC Framed Building <strong>23.</strong> Seismic Performance of A Retrofitted Building Using Various Numerical Models – A Comparative Study <strong>24.</strong> Influence of Modelling on the Effectiveness of Column Jacketing in the Seismic Performance of Arc Framed Building – A Comparitive Study Using Three Alternative Materials (RCC, Steel, FRP) <strong>25.</strong> Application of 3D Printing for Building Prototype Model of Osmania University Arts College – A Case Study <strong>26.</strong> Development of Artificial Neural Network Model for Geopolymer Concrete <strong>27. </strong>Effect of Slope Combination on Dynamic Analysis of RCC Chimney <strong>28.</strong> Development of Mathematical Model for Geo-Polymer Concrete <strong>29.</strong> A Comparative Study on Seismic Analysis of Irregular Framed Structure with Bare Frame, Open Ground Storey and Infilled Frame <strong>30.</strong> A Study on Skew Effect of Prestressed Concrete Bridges <strong>31.</strong> Estimating Runoff Using SCS Curve Number Method <strong>32.</strong> Daily River flow Modeling using Artificial Neural Networks <strong>33.</strong> Performance Evaluation of Daily Sediment Yield Transport Model Using Artificial Neural Networks <strong>34.</strong> Assessment and Evaluation of Groundwater Quality due to Landfill Leachate Using Fuzzy Logic <strong>35.</strong> Indian Summer Monsoon Rainfall Extremes Projections using Block Maxima Approach under Climate Change <strong>36.</strong> ANFIS Model for Reservoir Operation <strong>37.</strong> Water Distribution Network Model Using EPANET <strong>38.</strong> Temperature Projections from GCMs Using Quantile Remapping Method <strong>39.</strong> Evaluation of Performance of Isolated Signalized Intersections and Design of a Coordinated Signal System by Using VISSIM Software <strong>40.</strong> A Case Study of Mode Choice Analysis in Hyderabad City <strong>41.</strong> Evaluation of the Effect of Aggregate Gradation and Binder Parameters on Bituminous Mix Rutting <strong>42.</strong> Project Success Analysis of Contractor Organization Attributes using Regression Model <strong>43.</strong> Factors Affecting Cost Estimation: A Case from Yemen Construction Projects <strong>44.</strong> A Comparative Study of Different Contractor Selection Methods &nbsp;<br><br><br></div>